User Tools

Site Tools


Sidebar



gcode

GCODE

  • M25: stoppen SD-kaart print
  • M109 Sxxxx temperatuur instellen en wachten tot ie warm is (+ nog een paar seconden)
  • M105 get temperature
  • M104: Set Extruder Temperature: M104 S190
  • G91: Set to Relative Positioning
  • G90: Set to Absolute Positioning
  • G01 F10000 X50 Y50: move fast
  • M106: fan on
  • M107: fan off
  • M84: disable axes
  • M110: Set Current Line Number‎
  • M20: list files on SD-card
  • G28: Move to Origin
  • M115: Get Firmware Version and Capabilities

current start/end gcode for Ultimaker Original

startcode:

snippet.gcode
M104 S200
M109 S200
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F9000 ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E6 ;extrude 6 mm of feed stock
G92 E0 ;zero the extruded length again
G1 F9000
;Put printing message on LCD screen
M117 Printing...

endcode:

snippet.gcode
G1 F1500 E390.2043
M107
M104 S0 ;extruder heater off
G91 ;relative positioning
G1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
M84 ;steppers off
G90 ;absolute positioning
M104 S0

documentation

binary gcode by repetier

tools

gcode.txt · Last modified: 2017/06/20 23:44 by rick